Cutout Sizes for Solaire Grills & Accessories Note 1: Min. 2” clearance required between edge of cutout and inside back wall of enclosure for gas regulator. Note 2: Refrigerator installations require ventilation on both sides of enclosure. Minimum front-to-back inside clearance is 25 3/8.” SPECIAL NOTE: Grill installation into combustible enclosure requires insulated jacket. Order part #SOL-IRIJ-XX, where “XX” is the size of the grill in inches. NATURAL GAS SUPPLY NOTE: A standard 3/8” ID flexible natural gas supply hose has a maximum capacity of 60,000 BTUs and should be used with 27” and 30” grills only. A 1/2” ID natural gas supply hose is required for larger models, or for 30” grills with a side burner. The proper hose is available from Solaire, order part #SOL-12HOSE12. Printer-friendly version Dimension A 27” Grills • 26” 30” Grills • 28 1/2” 42” Grills • 40 1/2” 56” Grills • 54 1/2” IRIJ-27 & 27XL • 31 3/8” IRIJ-30 • 35” IRIJ-42 • 47” IRIJ-56 • 61” Dimension B AGBQ-27 • 16 1/4” AGBQ-27XL • 21” 30, 42, 56” Grills • 23” IRIJ-27 • 17 11/16” IRIJ-27XL • 22 9/16” IRIJ 30, 42, 56 • 24 1/2” Dimension C 27” Grills • 8 7/8” 30, 42, 56” Grills • 10 1/4” IRIJ-27 & 27XL • 10” IRIJ 30, 42, 56 • 11 1/4” Dimension D Door # IRAD-21 • 18 1/4” Doors # IRAD-30 • 27 1/4” Doors # IRAD-42 • 39 1/4” Refrig. # RC42 • 42 3/8” Dimension E All Doors • 18 1/4” Refrig. # RC42 • 21 3/8” Dimension F All Doors • 3 7/8” Refrig. # RC42 • 2 1/8” Detail for Flush-mounting If the countertop of your island overhangs the cabinet face, the countertop must be notched to accommodate the control panel or front of the Solaire equipment. Dimension A IRDT-24 • 23 1/4"IRDT-30 • 28 1/2"