Model Specifications
Santa Fe FS – Stove Rev D
| Appliance Width: | 25-1/2″ |
|---|---|
| Appliance Height: | 28-11/16″ |
| Appliance Depth1: | 21-1/4″ |
| BTU/hr Input2: | 11,600 – 38,700 |
| Heating Capacity3: | 700 – 1,900 sq ft |
| Hopper Capacity4: | 60 lbs |
| Viewing Area: | 201 sq in |
| Efficiency5: | 78.0% |
| Emissions: | 1.8 grams/hour |
1 Appliance Depth includes entire unit including depth of firebox and extension onto hearth.
2 BTU/hr Input based on maximum feed rate per hour multiplied by approximately 8600 BTU, which is average BTU from a pound of pellets.
3 This is a general guide, see your local dealer for help in determining the product that best suits your heating needs based on climate, home efficiency, location of the heater, and air movement in the room.
4 Fuel density and pellet shape will affect hopper capacity.
5 Weighted Average LHV (Low Heating Value) efficiency.
Heat output will vary depending on the type of fuel used. The flame and ember appearance may vary based on the type of fuel burned and the venting configuration used. Actual product appearance, including flame may differ from image shown. Refer to the owner’s manual for complete clearance requirements and specifications. Product specifications and pricing subject to change without notice. For testing and listing information please refer to the owner’s/installation manual.
*For select products: Heating capacity to be used as a guide only. See your local dealer for help in determining the product that best suits your heating needs based on climate and home efficiency.