3100i Wood Insert

he 3100i blends long-lasting Quadra-Fire quality with advanced Automatic Combustion Control (ACC) burn technology. ACC delivers precision air control during start-up and monitors heat levels for solid, consistent performance. These EPA certified wood fireplace inserts feature traditional styling, which can help accent your décor.

53,600 BTUs* — heats 1,000 to 2,500 square feet, based on climate and home efficiency
EPA certified, with low emission levels of 2.0 grams per hour
1.9 cu ft firebox capacity / recommended 16″ log length
Up to 10 hours of burn time from each load of wood^†
Easy start-up

*The amount of heat produced by a heating appliance is measured in British Thermal Units (BTUs). One BTU represents the amount of energy required to raise the temperature of 1 lb. of water by 1 degree F. Generally, more BTUs correlate to greater heating potential. However, the amount of BTUs needed to heat a specific area varies, based on climate and home efficiency.

Model Specifications

3100i ACC Wood Insert Fireplace

Appliance Width:	27-5/8″
Appliance Height:	21-1/2″
Front Width Minimum Firebox Opening:	28-7/8″
Height Minimum Firebox Opening:	22-3/4″
Depth Minimum Firebox Opening:	14-1/2″
Back Width Minimum Firebox Opening:	24-1/8″
Extension Onto Hearth:	12-1/2″
Peak BTU/hr Output¹:	53,600
Heating Capacity²:	1,000 – 2,500 sq ft
Maximum Burn Time³:	10 hrs
Firebox Capacity:	1.90 cu ft
Recommended Log Length:	16″
Efficiency⁴:	78.3%
Emissions:	2.0 grams/hour

¹ BTU: 1st hour output uses high burn efficiency number. BTU will vary depending on the type of fuel used and moisture content of the fuel.

² This is a general guide, see your local dealer for help in determining the product that best suits your heating needs based on climate, home efficiency, location of the heater, and air movement in the room.

³ Actual burn times will vary based on how the appliance is operated, load size, moisture content and type of wood used.

⁴ Weighted Average LHV (Low Heating Value) efficiency.

Heat output will vary depending on the type of fuel used. The flame and ember appearance may vary based on the type of fuel burned and the venting configuration used. Actual product appearance, including flame may differ from image shown. Refer to the owner’s manual for complete clearance requirements and specifications. Product specifications and pricing subject to change without notice. For testing and listing information please refer to the owner’s/installation manual.

*For select products: Heating capacity to be used as a guide only. See your local dealer for help in determining the product that best suits your heating needs based on climate and home efficiency.

†For wood-burning appliances: Actual burn times will vary based on how the appliance is operated, load size, moisture content and type of wood used, and installation.